MARPOL,ISM,ISO,IMO AND STCW OBJECTIVE PAPER
- Gas carrier code after july 1980
A.GC CODE
2.IG CODE (correct)
3.IMDG CODE
4.IB CODE
Answer-2
- Appointment of a designated person ashore (DPA) is a requirement under which of the following instruments?
A. STCW code
B. ISPS code
C. Marpol 73/78
D. ISM code (correct)
Answer-D
- Minimum number of lifebuoys that need to be carried on cargo ships of length 200 m and above is_______________
A. 24
B. 18
C. 14 (correct)
D. 12
Answer-C
- Minimum number of rocket parachute flares required to be carried on board is___________
12
- The validity of which of the following certificates is not 5 years?
A. Safety equipment certificate.
B. Load line certificate.
C. Tonnage certificate(correct)
D. Safety radio telegraphy certificate
Answer-C
- Under the Indian Merchant shipping act 1958, the maximum number of members that can be appointed by the Central Government of India to the National Shipping Board is:
A. 6
B. 16(correct)
C. 4
D. 2
Answer-B
- Appointment of a designated person ashore (DPA) is a requirement under which of the following instruments?
A. STCW code
B. ISPS code
C. Marpol 73/78
D. ISM code
Answer-D
- Which is considered safest protection from static electric disharge when connecting or disconnecting cargo hoses or metal arms??
a.insulating flange or length of non conducting hose.(correct)
b.switching off iccp
c.ship shore bonding cable use.
d.none of the above
Answer-A
- Annex I regulation 12 sludge takes concentration:
A. Bilge pump to OWS
B. No line direct connection to OBD other than discharge give in regulation 13(correct)
C. No direct connection to OBD
D. Have direct connection to OBD all the valve to be close and sealed
Answer-B
- Which of the following kinds of total flooding system is most suited for very large spaces like car carrier car decks?
A. High pressure multi cylinder type CO2 installation
B. Low pressure bulk storage tank type CO2 installation(correct)
C. Low expansion foam systems
D. Fixed pressure water spraying systems
Answer-B
- Post Nox emission test bed trial and approval of an engine, periodic Nox emission limit verification is normally done by:
A. Emission tests at regular intervals
B. Engine parameters/settings check metho
C. By running the engine at full load and sending a sample of exhaust gas for analysis
D. By checking emission monitors installed on exhaust outlet
Answer-B
- An airplane wants a vessel to change course and proceed towards a vessel in distress. The actions of the aircraft to convey this message will NOT include __________.
a. circling the vessel at least once
b. heading in the direction of the distress location
c. flashing the navigation lights on and off(correct)
d. crossing ahead and rocking the wings
Answer-C
- Reporting of near misses, incidents and accidents is a requirement under:
a. ISO 9001:2001 code
b. ISM code(correct)
c. ISO 14001
d. OHSAS
Answer-B
- Which of the following statements is true?
A. Ballast water exchange at mid ocean eliminates completely the risks associated with introduction of non-native organisms and pathogens in alien habitats.
B. In the flow through method, the water pumped through a tank should be at least 3 times the tank volume.(correct)
C. Over pressurization of a tank cannot take place during the flow through method.
D. Air pipes on ballast tanks are designed for continuous overflow.
Answer-B
- Records of tests and inspections of a cargo vessel's fire extinguishing systems shall be kept on board __________.
a. for 1 year
b. for 2 years
c. until the next Coast Guard inspection
d. until the vessel's Certificate of Inspection expires(correct)
Answer-D
- By using which of the tank we can change the draft but not changing trim of the ship
a]peak tank,
b]DB tank,
c) deep tank,(correct)
d) top side tk
Answer-C
- M/C space opening are to have _____door with ______ position.
A. watertight & 450mm
b. water tight & 350mm
C. water tight & 600mm
D. Weather tight & 600mm
Answer-
- A Suezmax vessel will have the following maximum limitations:
A. B=34 m & d=10 m
B. B=44 m & d=12 m
C. B=54 m & d=14m
D. B=64 m & d=16 m
Answer-
- What is normally used to pass a mooring line to a dock?
A Distance line
B Gantline
C Heaving line(correct)
D Tag line
Answer-C
- Panting frames are located in the __________.
A) after double bottoms
B) centerline tanks on tankships
C) fore and after peaks(correct)
D) forward double bottoms
Answer-C
- K.G of ship increases with...
a) adding weight above on present kg
b)balasting db tank
c)moving weight in transverse direction
d)moving weight in frwd direction
Answer-A
241)The difference between the starboard and port drafts due to wind or seas is called __________.
A) list
B)heel(correct)
C) trim
D) flotation
Answer-B
- Which of the devices listed must be used in conjunction with the portable in-line foam proportioner to produce foam?
A. A plain or common fire hose nozzle
B. The mechanical foam nozzle(correct)
C. Any low velocity applicator
D. An all-purpose nozzle
Answer-B
- Minimum possible no. of watertight bulkheads in ships with machinery space amidships is
a) 4(correct)
b) 3
c) 2
d) 5
Answer-A
- Following cant be burnt in incinerator Shipboard incineration of the following substances shall be prohibited:
(a) Annex I, II and III cargo residues of the present Convention and related contaminated packing materials;
(b) polychlorinated biphenyls (PCBs);
(c) garbage, as defined in Annex V of the present Convention, containing more than traces of heavy metals; and
(d) refined petroleum products containing halogen compounds.
Answer-A and B
245). The proper stimulant for an unconscious person is a/an
a.vigorous shaking
b.sequence of back blows
c.precardial thump
d.ammonia inhale(correct)
Answer-D
No comments:
Post a Comment